MIMAKI JFX200-2513EX - Cleaning Around the Station

Chapter 4 Maintenance
4-11
Cleaning around the station
We recommend that you clean the machine often to maintain the quality of the machine and the images.
• Clean the area around the station twice a week (frequency of cleaning differs depending on the usage
frequency of the printer).
• If the ink left in the waste ink tray hardens due to UV light, the ink discharged during flushing cannot move
to the waste ink bottle. We recommend that you clean the waste ink tray often.
1
Press the [MAINT.] key in LOCAL.
CARRIAGE OUT
[ENT]
2
Press the [ENTER] key.
MOVE POSITION
: STATION MAINT.
3
Press to select [STATION MAINT.] and then press the [ENTER] key.
• Carriage moves onto the table.
• Clean the waste ink tray.
Moving carriage
4
Use a cloth to wipe off the ink around the waste ink tray.
• Clean the gray area shown in the figure below.
• If the ink is stuck to the surface and cannot be wiped, use a spatula or another similar tool to
scrape it off.
4