MIMAKI JFX200-2513EX - Setting Nozzle Surface Cleaning Frequency

Chapter 3 Convenient Usage
3-23
Setting Nozzle Surface Cleaning
Frequency
This function automatically cleans the nozzle face of the head and removes the ink droplets clinging to the
nozzle face before or during printing.
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
[ENT]
VIEW
2
Press to select [SETUP].
FUNCTION
[ENT]
SETUP
3
Press the [ENTER] key.
SETUP
[ENT]
DROP.POScorrect
4
Press and select [INTERVAL WIPING].
SETUP
[ENT]
INTERVAL WIPING
5
Press the [ENTER] key.
SETUP
[ENT]
INTERVAL WIPING
6
Press to select the type of interval wiping.
• When you select "PAGE" in [INTERVAL WIPING], once the set number of prints is complete, the
head nozzle is cleaned automatically before the next print starts.
• When you select "TIME" in [INTERVAL WIPING], the head nozzle is cleaned automatically once
the print time exceeds the set time.
• If you do not want to set [INTERVAL WIPING], select "OFF" and proceed to Step 9.
INTERVAL WIPING
: PAGE
7
Press the [ENTER] key.
8
Press to set wiping interval.
• Available settings (PAGE): 1 to 100 pages
• Available settings (TIME): 3 to 50 min
INTERVAL
1 page
=
9
Press the [ENTER] key.
3