MIMAKI JFX200-2513EX - When the Machine Is Not Used for a Long Time

Chapter 4 Maintenance
4-13
4
Take washing liquid in a dropper and fill the cap with it until it is full.
• Fill the cap with washing liquid until it is about to overflow.
5
Press the [ENTER] key.
• After the dry suction operation is performed for 30 seconds, the display returns to Step 2.
DISWAY WASH
PLEASE WAIT
When the Machine Is Not Used For a Long Time
When the machine is not going to be used for a week or more, use the cleaning function for storage to clean
the head nozzles and ink discharge passage. After this, keep the machine in custody.
Check these items in advance Is [INK END] displayed?
• The ink is absorbed during washing.
If the ink end is detected at this time, washing cannot be performed.
• Replace the ink bottle with another one for which the ink end has not
been detected.
1
Press the [MAINT.] key in LOCAL.
CARRIAGE OUT
[ENT]
2
Press to select [CUSTODY WASH].
CUSTODY WASH
[ENT]
3
Press the [ENTER] key.
• Carriage moves onto the platen.
WIPER CLEANING
[ENT]
COMPLETED
• [COMPLETED (NEXT): ENT] is displayed on the screen until the cleaning work of wiper and bracket
is complete. Press the [ENTER] key after Step 4 is complete. If you press the [ENTER] key before
the cleaning is complete, the machine moves to the next washing step.
4