Chapter 2 Basic Usage
2-17
Printing the Data
Starting a Printing Operation
1
Set the media
• "Setting up the Media" (P. 2-5)
(1) Open or close the suction valve according to the media size.
(2) Press the [VACUUM] key to turn on the VACUUM lamp and adsorb the media.
2
Press the [REMOTE] key in LOCAL.
• The screen changes to REMOTE mode and data can be received from the PC.
3
Send the data to be printed from the PC to the printer.
• View the printing conditions.
• For how to send the data, read the instruction manual of the output software.
䢸䢲䢲䢢䣺䢢䢻䢲䢲䢢䢢䢱䣔䢢䢱䣏䣒䢴
䢸䢢䢱䣄䣦䢢䢱䣐䣦䢢䢱䣺䢴䢢䢢䢢䢢䢢䢢䢢䣺䣺䢰䣺䢢䣯䣯
Resolution: 600 x 900
DPI
Nozzle recovery settings
Presence of MAPS settings
Number of
passes
Scan direction
Ud: Unidirectional
Bd: Bidirectional
Scanning speed
x1: Standard speed
x2: Double speed
Data type
VD: Variable data
ND: Normal data
HEAD GAP value
2
To Next Page
Loading...
