MIMAKI JFX200-2513EX - Ionizer Settings

Chapter 3 Convenient Usage
3-20
Ionizer Settings
Set the operations when the optional ionizer is installed.
• These settings are not displayed if the optional ionizer is not installed. If this setting is not displayed even
though the ionizer is installed, contact your local distributor, or our sales office or call center.
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
[ENT]
VIEW
2
Press to select [SETUP].
FUNCTION
[ENT]
SETUP
3
Press the [ENTER] key.
SETUP
[ENT]
DROP.POScorrect
4
Press to select [IONIZER].
SETUP
[ENT]
IONIZER
5
Press the [ENTER] key.
IONIZER
: ON
6
Press to select the value to be set.
• ON:
For normal printing, the ionizer is turned on before printing starts and when printing is in process,
and static electricity is removed. For reverse printing, static electricity is removed before printing.
The ionizer power is turned on when shifting to [VIEW].
• OFF:
Static electricity is removed.
IONIZER
: OFF
7
Press the [ENTER] key.
SETUP
[ENT]
IONIZER
8
Press the [END] key several times to end the operation.