Chapter 4 Maintenance
4-43
2
Press to select [FLUSHING FILTER].
STATION MAINT.
[ENT]
FLUSHING FILTER
3
Press the [ENTER] key.
4
Press the [ENTER] key.
FILTER REPLACE
[ENT]
COMPLETED
• [COMPLETED :ENT] is displayed on the screen until the filter replacement is complete. Press the
[ENTER] key after Step 5 is complete.
If you press the [ENTER] key before the replacement is complete, the machine moves to the next
procedure.
5
Replace the flushing filter and press the [ENTER] key.
• The carriage returns to the station and the mode returns to LOCAL.
4
To Next Page
Loading...
