Chapter 1 Before Use
1-10
l
Pay attention to following when replacing the ink
• To prevent the ink from sticking to your hands or eyes when it splashes, be sure to wear the included
safety glasses and gloves.
• Do not pull the ink cover too much.
Pulling it too much might damage the tubes and cables.
• Replace the ink bottle after cleaning the surroundings with a waste cloth, etc. The portion around the
bottle becomes dirty as the ink oozes from the float part.
l
Wear safety glasses and gloves when performing maintenance
When performing maintenance such as ink replacement, be sure to wear the included safety glasses and
gloves.
Also, wear a gas mask if necessary.
To Next Page
Loading...
