MIMAKI JFX200-2513EX - Page 67

Chapter 2 Basic Usage
2-19
2
Press the [ENTER] key.
VIEW
MOVE START
<ent>
3
Press the key.
VIEW
SET VIEW POS
4
Press the [ENTER] key.
SET VIEW POS
=
**** mm
5
By pressing the keys, set the position to which the Y-bar is to be moved.
• key: The Y-bar moves to the backside of the table with the point of origin in the center.
• key: The Y-bar moves to the front side of the table with the point of origin in the center.
SET VIEW POS
=
500 mm
6
Press the [ENTER] key.
• The value is set and the display returns to Step 2.
** MOVING NOW **
PLEASE WAIT
Moving the Y-bar to VIEW position
1
Press the [FUNCTION] key in LOCAL.
FUNCTION
VIEW
[ENT]
2
Press the [ENTER] key.
VIEW
MOVE START
<ent>
3
Press the [ENTER] key.
• Y-bar moves.
** MOVING NOW **
PLEASE WAIT
2