MIMAKI SWJ-320 S2 - Replacing Consumables; Replacing the Wiper

4-27
1
1
1
4
Routine Maintenance
Replacing consumables
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary to
replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the key in LOCAL.
2
Press the key.
• The carriage moves to the maintenance position.
3
Open the rght maintenance cover then remove the
wiper.
• Pull out the wiper by holding the protrusions at its both ends.
4
Insert a new wiper.
• Insert a new wiper by holding its both ends.
5
Close the right maintenance cover then press the
key.
• After its initial operation, the machine returns to LOCAL.
• A cleaning wiper is an option.Buy one through the dealer in your region or at our service office.
• Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.
After the work up to the Step 5 is completed and you close the front cover, press the
key.
<LOCAL>
!Rep l ace Wi per
[MNT]
REPLACE WI PER
EXECUTE [ ENT ]
REPLACE WI PER
COMP L ET ED [ ENT ]
Projection
Projection
*Be i ng In i t i a l i zed*
PLEASE WA I T