3-8
Setting nozzle face cleaning time
When the set time has passed, nozzle face of the head is cleaned automatically to remove ink droplets on the
nozzle face.
In case that deflection, nozzle missing, or symptom which ink droplets fall down occurred, make the interval
between each operation shorter.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [INTERVAL WIPING].
4
Press the key.
5
Press to set intervals.
• Set Value : AUTO, Seconds, OFF
• When [OFF] is set, periodical wiping is not executed.
6
Press the key.
7
Press the key several times to end the setting.
To Next Page
Loading...
