2-36
Using method of weight for assistant roller
When ruck occurs on the media on the platen, you can put the weight on the assistant roller to reduce the
height of ruck.
3
Put the weight on the assistant roller Assy, and
slide it to the front until it hits the protrusion.
• You can put up to three weights on one
assistant roller Assy.
• If you put the weight too much, ruck may be increased unnecessarily.
• While checking occurrence of ruck during printing, increase the weight gradually from 0, and use the
machine having the weight with which the media has least ruck.
To Next Page
Loading...
