MIMAKI SWJ-320 S2 - Stopping a Printing Operation Halfway; Deleting Received Data (Data Clear)

2-35
1
2
Basic Operations
4
5
6
Printing Data
Stopping a printing operation halfway
Perform the following operation when stopping a printing operation halfway.
1
Press the key during printing.
• The printing operation stops.
• Interrupt data sending at the PC side during the data is sent from the
PC.
• Printing restarts from the interrupted data by repressing the key.
Deleting Received Data (Data Clear)
When you want to stop printing, delete the already received data.
1
Press the key in LOCAL.
2
Press the key.
• The ACTIVE lamp goes out.
• The received data is erased then it returns to the local mode.
<LOCAL>
wi d t h : 1272mm
DATA CLEAR
[ENT]
** DATA CLEAR **