MIMAKI SWJ-320 S2 - Washing Ink Discharge Passage (DISWAY WASH)

4-8
Washing the Ink Discharge Passage (DISWAY WASH)
Wash the ink discharge passage regularly to prevent the head nozzles from clogging due to ink coagulation
inside the passage.
1
Press the key in LOCAL.
2
Press to select [DISWAY WASH].
3
Press the key.
• The carriage moves to the maintenance position.
• Dry suction operation is performed repeatedly until the washing
work is completed.
4
Open the right maintenance cover.
5
Fill up the cap with cleaning solution for
maintenance, using a dropper.
• Fill the cap with the cleaning solution just before the
solution overflows from the cap.
6
Close the right maintenance cover and press the
key.
• After the idle absorbing operation has been performed for 30
seconds, the screen returns to step2.
STAT I ON
CARR I AGE OUT [ ENT ]
STAT I ON
DISWAY WASH [ENT]
DISWAY WASH
COMP L ETED [ ENT ]
Right maintenance cover
DISWAY WASH
PLEASE WA I T
STAT I ON
DISWAY WASH [ENT]