Names of Parts and Functions
1-8
Capping station
The capping station consists of the ink caps, the wiper for
cleaning the heads, etc.
The ink caps prevent the nozzles in the ink heads from drying up.
The wiper cleans the nozzles in the heads.
The wiper is consumable.If the wiper is deformed or the media is
stained, replace the wiper with a new one. ( P.4-27)
Pinch rollers and Feed rollers
This machine retains the media with the pinch
rollers and feed rollers. During printing operation,
the feed rollers feed the media forward.
Lighting inside the unit
In this unit, a fluorescent lamp for checking the
printing result within the platen and LED for
checking the condition of the bottom surface of
head at the maintenance of print head are
equipped.
• Be sure to wear the attached goggles in cleaning within the capping station to protect your eyes
against ink. Otherwise, you may get ink in your eyes.
• Keep the pinch rollers lifted up when this machine is not in use. If the pinch rollers are left lowered for
an extended period of time, they can be deformed and fail to securely retain the media.
To Next Page
Loading...
