6-2
Specifications
Machine specifications
Item
SWJ-320S2 SWJ-320S4
Print head
Method Drop-on-demand piezoelectric print heads
Specification 2 head 4 head
Drawing mode (scan x feed) 360 x 600, 540 x 600, 720 x 600, 720 x 900,1080 x 600, 1080 x 900, 1080 x 1200
Usable inks
CS ink
Y, M, C, K
Ink supply
Supplying from ink bottles through tubes.
Ink bottle replacement type
Capacity of ink bottle 2,000ml
Media type PVC/ Tarpaulin
/ FF
Max. printing width
Y360dpi: 3200 mm
Y720dpi: 3200mm
Y1080dpi: 3000mm
Roll Media
size
Maximum 3250 mm
Minimum 1300 mm
Thickness 1 mm or less
Roll inside diameter 3 inches
Printing surface Roll inside/out side Both possible
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Feeding device
Maximum outline: Φ220 mm
Maximum outline when using narrow roll feeding: Φ180
Maximum weight: 100 kg
Maximum weight when using narrow roll feeding: 25kg
Take-up device
Maximum outline: Φ120 mm
Maximum weight: 40 kg
Leaf media
size
Maximum 3250 mm
Minimum 210 mm
Distance
accuracy
Absolute accuracy
Whichever the larger one of ± 1.5 mm or ± 0.3 % of the designated
Reproducibility
Perpendicularity ± 2.5 mm / 1000 mm
Media skew 5 mm or less / 10000mm
Head height adjustment
Stepless adjustment 2 ~ 4 mm
Cutting of media Cutting by hand.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank
Bottle type (10L): 2 pcs. (1 per the left side purge area and 1 at the suction pump
part of the right side)
Interface USB 2.0
Command MRL- III
Power
AC200 - 240 ± 10%, 50/60Hz ± 1Hz,
INLET1: 5A or less
INLET2: 10A or less
INLET3: 14A or less
Power consumption
INLET1: 1200VA or less
INLET2: 2400VA or less
INLET3: 3360VA or less
Reco-
mended
Environ-
ment
Available temp. 20 °C to 30 °C
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature change ± 10 °C / h or less
Dust 0.15mg/m
3
(Equivalent to normal office level)
Highest operation height 2000 m
To Next Page
Loading...
