MIMAKI SWJ-320 S2 - Turning Power ON

2-3
1
2
Basic Operations
4
5
6
Turning the Power ON/OFF
Turning the Power ON
This machine is provided with the following two power switches:
Main power switch:Two switches are located on the side of this machine.Keep this switch ON all the time.
Power switch : Normally, use this switch to turn the power ON/OFF.
The power switch lights when the power is ON.
1
Turn the main power switch ON.
• Set the two main power switches located on the side of this
machine to the “I” side.
2
Turn the power switch ON.
• Push the power switch located on the operation panel.
• The firmware version is displayed when the power is turned ON.
• The machine performs its initial operation.
3
The machine enters LOCAL.
4
Turn ON the power of the connected PC.
• Turn the power ON after the front cover and maintenance cover are closed.
• The head nozzle may result in nozzle clogging if the main power switch is left OFF for a long time.
Main power switch
Power switch
JV400-160 St ar t - up
Ve r 1 . 00R0
<LOCAL>