MIMAKI SWJ-320 S2 - Setting the Adsorption Fan

2-21
1
2
Basic Operations
4
5
6
Preparing for the Heaters
Setting the adsorption fan
1
Turn on the power of adsorption fan.
2
Adjust the adsorption power by rotating
the adsorption power adjustment dial.
• Clockwise: Stronger
• Counter-clockwise: Weaker
• If the adsorption power is strong: Unevenness feeding may occur.
• If the adsorption power is weak: The media is not fixed and may contact to the head.
• Adjust the adsorption power according to the media to use.
• Adjust at the position between 9 o’clock and 1 o’clock.
• Be sure to execute “FEED COMP.” after the adjustment of adsorption power.（ P. 2 -
26）
Adsorption power adjustment dial
OFF
ON
Available
range for
adjustment