MIMAKI SWJ-320 S2 - Capping Station Maintenance; Cleaning Wiper and Cap

4-5
1
1
1
4
Routine Maintenance
Maintaining the Capping Station
Maintain the ink cap, wiper, etc. located in the capping station. (SATION MAINT.)
The ink cap and wiper function as follows.
• Wiper : It wipes off ink sticking to the head nozzles.
• Ink cap : It prevents the head nozzles from clogging due to dryness.
As the machine is used repeatedly, the wiper and ink cap gradually become dirty with ink, dust, etc.
If nozzle missing cannot be corrected even after head cleaning ( P.2-25) has been performed, use a
cleaning solution kit and clean stick.
Cleaning the Wiper and Cap
It is recommended that the wiper and cap be cleaned frequently in order to maintain the high image quality of
the machine and keep the machine itself in good working order.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [STATION MAINT.].
4
Press the key.
• The carriage moves to the maintenance position.
Tools required for
Maintenance
• Cleaning solution kit 200 (SPC-0369)
• Clean stick (SPC-0527) • Gloves • Goggles
• Be sure to wear the supplied goggles and gloves when maintaining the capping station.Otherwise,
you may get ink in your eyes.
• Do not move the carriage out of the capping station by hand.When it is desirable to move the
carriage, press the key to execute the carriage-out. ( P.4-5 Steps 1 to 2)
• When CS ink is used, the ink sticks around the wiper easily. Clean the wiper and the area around it
about twice a week (it varies, depending on frequency in the use of the machine).
• Replace the wiper with a new one when it is extremely dirty or bent.( P.4-27)
• When cleaning the wiper, be careful that lint from the clean stick does not get left on the
wiper.Remaining lint may cause image quality to deteriorate.
STAT I ON
CARRIAGE OUT [ENT]
MOV E ME N T P L A CE
:STATION MAINT.
MOV E ME N T P L A CE
:STATION MAINT.
Carriage