4-6
5
Open the right maintenance cover cover then
remove the wiper.
• Pull out the wiper by holding the protrusions at its both ends.
6
Clean the wiper and bracket.
• Wipe off the ink sticking to the wiper and bracket with a
clean stick dipped in cleaning solution for maintenance.
Wipe off so that cleaning solution for maintenance will not
remain.
7
Clean the wiper slider.
• Wipe off the ink sticking to the wiper slider with a clean stick
dipped in cleaning solution for maintenance.
Wipe off so that cleaning solution for maintenance will not
remain.
8
Set the wiper at the original position.
• Insert the wiper by holding both ends of the wiper.
9
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in cleaning solution for
maintenance.
Wipe off so that cleaning solution for maintenance will not
remain.
To Next Page
Loading...
