MIMAKI SWJ-320 S2 - Setting the Feed Compensation Mode

3-16
Setting the Feed Compensation Mode
You can select the compensation mode for media feed.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [FEED COMP. MODE].
5
Press the key.
6
Press to select MODE1/MODE2.
7
Press the key.
8
Press the key several times to end the setting.
If you select MODE1
Feed Compensation is available either for Feed Correction ( P.2-26)
or Feed Check Pattern ( P.2-30).
If you select MODE2
Feed Correction ( P.2-26) is available only for Feed Correction.
(The Feed Check Pattern Menu will no longer be displayed.)
• Correcting Media-feeding( P.2-27) during printing is available in any MODE.
• If you run any compensation process in MODE1, the feed compensation value during printing will be
0.
• If you run any compensation process in MODE2, The feed compensation value during printing and
the compensation value for Feed Correction ( P.2-26) are the same.
FUNCT I ON
SETUP [ ENT ]
FUNCT I ON
MACH I NE S E TUP [ EN T ]
MACH I NE S E TUP
AUTO Powe r - o f f [ ENT ]
MACH I NE S E TUP
FEED COMP . MODE [ ENT ]
FEED COMP . MODE
:MODE1
FEED COMP . MODE
:MODE2
MACH I NE S E TUP
FEED COMP . MODE [ ENT ]