Replacing consumables
4-29
1
1
1
4
Routine Maintenance
Replacing the fan filter
When the fan filter is stained with ink, replace it.
Rough standard for replacing filter: Per printing about 2,000m
2
(12 roll media of width 3.2m x length 50m)
1
Confirm whether the carriage is stand by, and turn
off the main power switch.
2
Open the right maintenance cover and the front cover.
3
Loosen a screw by turning two or three turns, and
remove filter holder plate 1•2 and fan filter together.
4
Move the filter holder plate 1 a little bit, and replace
the fan filter with new one.
• Fan filters are option. Buy one through the dealer in your region or at our service office.
Fan filter (SPA-0201) 10 pcs
To Next Page
Loading...
