MIMAKI SWJ-320 S2 - Connecting the Power Cable

Connecting Cables
1-10
 Removing USB memory
If a USB memory module is inserted in the personal computer to which a SWJ-320S machine is connected,
click "Stop" in the "Safely Remove Hardware" window by following the instructions given there first and then
remove the module.
Leaving a USB memory module inserted can cause [ERROR 201 COMMAND ERROR].
Copy the data onto the hard disk before outputting it for printing.
Connecting the power cable
1
Insert the power cable into
an inlet of the machine.
2
Insert the power cable of
the Drying fan into the inlet
of the Drying fan.
3
Insert the power plug into a plug socket.
• Do not use any power cables other than the attached power cable.
• Be sure to connect the power cable to the outlet near this machine, and make sure that the power
cable can be easily removed.
• Connect the power cable to the grounded outlet.Otherwise, it may result in fire or an electric shock.
Inlet
Power cable
Drying fan
Power plug
Socket