MIMAKI SWJ-320 S2 - Chapter 2 Basic Operations; Workflow

2-2
Workflow
1
Turning the Power ON/OFF
2
3
Setting a Media
4
Preparing for the Heaters
5
Test Printing
Set the media feeding
Referring to “Turning the Power ON/OFF”
( P.2-3).
Referring to “Setting a Media” ( P.2-5).
Referring to “Preparing for the Heaters”
(P.2-20).
Referring to “Test Printing” ( P.2-23).
Referring to “Set the media feeding” ( P.2-26).
6
7
Correct the ink drop position for
bidirectional printing
Printing Data
Referring to “Correct the ink drop position for
bidirectional printing” ( P.2-32).
Referring to “Printing Data” ( P.2-34).