MIMAKI SWJ-320 S2 - Page 37

2-11
1
2
Basic Operations
4
5
6
Setting a Media
5
Open the front cover and move the media press to
outside.
6
Slide the media from the back to the front.
(1) Make the Feeding direction switch “OFF”.
(2) Pull the media until the tension bar moves upward
completely (to the highest position).
(3) Return the media with the tension bar’s weight. (If it
cannot return with its weight, move the tension bar
downward with your hand.)
7
Lower the clamp lever to hold the media.
• Insert the roll media between the
platen and the pinch roller, and slide it
to the front.
• Pull the media out to the front of this
machine with enough length.
Front cover
Media Press
Clamp lever