Cleaning the Ink Head and the Area around It
4-13
1
1
1
4
Routine Maintenance
7
Wipe ink sticking to the side of the head off with a clean stick.
(1) Open the left maintenance cover.
(2) Clean around the head (green position) with a clean stick or waste.
8
Press the key after the cleaning.
• After the initial operation, it returns to the display of Procedure 1.
• Do not clean the nozzle surface in this work.
Clean with a clean stick or a waste cloth.
The nozzle part (Never touch it.)
Clean the side surface of the head (shown
in deep green) with a clean stick.
lamp button
Open/ Close cover
Cross section
Cleaning position
(green)
Head
Nozzle surface
(Do not touch in this cleaning work.)
To Next Page
Loading...
