3-3
5. As shown in the figure, press hard on both sides of the snap hook in the arrow direction and
then open it outward. Release the five quick snap hooks on the carton in turn and take out
the carton.
6. Cut the protection film around the A8/A9 with a pair of scissors. Take care not to scratch or
otherwise damage the machine.
7. Remove and discard the protection film. Verify that the display packing box and negative
pressure suction packing box (optional) are placed on the work surface and the electronic or
mechanical vaporizer packing box (optional) is placed on the side. Remove all packing
boxes and EPE foam.
Negative pressure suction
packing box (optional)
Electronic or mechanical vaporizer
(optional)
To Next Page
Loading...
Need help?
General
