10-3
3.Insert the USB drive in the machine on which the function configurations need to be activated.
Access the License menu as follows: Select Main > Service, enter the correct password, and
select Setup > License, as shown below:
4.Click Install to active the function configurations via the USB drive. When the activation is
completed, the system displays "New functions activated, please restart! "
NOTE
Ensure the anesthesia machine is powered on before the activation is completed
or an error message appears; otherwise, the BIOS program of the CPU board on
the anesthesia machine will be damaged.
After the activation success message is displayed, restart the anesthesia machine
for the new functions to take effect.
To Next Page
Loading...
