EasyManua.ls Logo

Mindray Accutorr 7 - WLAN Test

Mindray Accutorr 7
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accutorr 7 Operator’s Manual 14 - 3
6. Select [Network Name (SSID)] and enter the network name.
7. Select a security mode from the [Security] drop-down list and configure the items.
[WPA2 PSK]: When you select one of these security modes, you need to
enter a password for the wireless network.
[WPA2 AES], [CCKM AES], [WPA PSK AES], [WPA_AES]: These security
modes are Wi-Fi Protected Access (WPA/WPA2) enterprise encryption
modes. When you select one of these security modes, you need to configure
additional items such as [EAP Method], [AUT. Protocol], [Identity],
[Anonymity], and [CA Certificate]. You need to import the desired
certificate to the monitor before you can select a certificate. For how to
manage certificates, refer to 14.4 Managing Certificates.
7. Click [Ok] to confirm the setting.
14.1.4 WLAN Test
To test the availability of the wireless network, follow this procedure:
1. Select [Main] [Maintenance>>] [User Settings >>] enter the required
password Select [Ok] to access the [User Settings] menu.
2. Select [Network >>] [Monitor Network Setup >>] to access the Monitor
Network Setup menu.
3. Set the [Network Type] to [WLAN].
4. Select [Ok].
5. Select [WLAN Test >>] in the [Network Setup] menu.
6. Enter the [IP Address] of wireless AP in the [WLAN Test >>] menu.
7. Click [Connection Test].
You should not change the monitors IP address randomly. If you want to know details
about IP address setup, contact the technical personnel in charge of the CMS.
NOTE
When the network type is set to LAN, the monitor uses the wired network to
obtain data, and the screen displays the icon of a wired network.
When the network type is set to WLAN, the monitor uses the optional
wireless network to obtain data, and the screen displays the icon of a wireless
network.
The design, installation and maintenance of the wireless network’s
distribution should be performed by authorized personnel.
In a wireless (optional) network, the existence of obstacles (such as walls) will
affect data transmission or even cause wireless network interruption.

Table of Contents

Other manuals for Mindray Accutorr 7

Related product manuals