Accutorr 7 Operator’s Manual 5 - 1
5 Managing Configurations
5.1 Overview
When performing continuous patient monitoring, the clinical professional often needs
to adjust the monitor’s settings according to the patient’s condition. The collection of all
these settings is called a configuration. The monitor provides different sets of
configurations to accommodate the varying patient categories and departments. You
can change the settings from a default configuration and then save it as a user
configuration.
• The configuration management function is password protected. The
configuration management tasks must be performed by clinical
professionals.
The system configuration items can be classified as:
■ Parameter configuration items
■ These items relate to parameters, e.g. alarm switch, alarm limits.
■ Conventional configuration items
These items define how the monitor works, e.g., display setup, print and alarm
settings.
■ User maintenance items
These items relate to user maintenance settings, e.g., unit setup, time format.
For the important configuration items and their default values and user maintenance
items, refer to C Default Configurations.
5.2 Accessing [Manage Configuration] Menu
1. Select [Main] → [Maintenance >>] → [User Settings >>]. Enter the required
password and then select [Ok].
2. Select [Manage Configuration >>].
To Next Page
Loading...
