EasyManua.ls Logo

Mindray Accutorr 7 - Power Supply Specifications

Mindray Accutorr 7
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A - 2 Accutorr 7 Operator’s Manual
WARNING
The equipment may not meet the performance specifications given here if
stored or used outside the specified temperature and humidity ranges.
NOTE
The environmental specifications of parameter modules are the same as
those of the main unit.
A.3 Power Supply Specifications
AC Power
Battery
Line voltage 100 to 240 VAC ~ (±10%)
Current 0.9 to 0.5A
Frequency 50/60 Hz (±3Hz)
Fuse T2AL-250V
Battery Type Rechargeable lithium-ion, LI23S002A
Voltage 11.1 VDC
Capacity 4500 mAh
Run time At least 8 hours when powered by a new fully-charged
battery at 25 °C±5 °C (77°F±41°F) with SpO
2
cable
connected, and auto NIBP measurements at an interval
of 15 minutes.
Charge time Monitor power off: less than 5.5 hours to 90%; less than
6.5 hours to 100%.
Monitor power on: less than 10.5 hours to 90%; less than
11.5 hours to 100%.
Shutdown delay At least 20 minutes (after a low battery alarm first
occurs)

Table of Contents

Other manuals for Mindray Accutorr 7

Related product manuals