14 - 10 Accutorr 7 Operator’s Manual
â—† [User Name Only]: Only the user name saved in the MLDAP server is
required to send data to the EMR.
â—†
[User Password]: sending data to the EMR is password protected. The user
name and password saved in the MLDAP server are required.
5. Select [User Settings] to set password protection for accessing the
[User
Settings] menu.
â—†
[Local Password]: Changing user maintenance settings is password
protected. The monitor's local password is required for accessing the [User
Settings] menu is required.
â—†
[User Password]: Changing user maintenance settings is password
protected. The user name and password saved in the MLDAP server are
required to access the [User Settings] menu.
To change the monitor’s local password for modifying alarm settings, select [Modify
Local Alarm Setup Password>>], enter the new password, and select [OK].
To change the monitor’s local password for accessing the [User Settings] menu, select
[Modify Local User Maintenance Password>>], enter the new password, and select
[OK].
To Next Page
Loading...
Need help?
General
