4 - 8 Accutorr 7 Operator’s Manual
1. Tabular trend
2. Button area
3. Data status
4. Parameter value triggering alarm
In this tab, you can:
■ Select [MRN], [Name], or [Visit] and then select the desired patient.
■ Select [Filter] to select trends you want to review.
■ Select the page key (for example ) and then use up or down arrow
beside the key to turn the page.
■ Select [Edit] to edit patient demographics or manual input data of selected
patient.
■ Select [Delete] to delete the trend data of selected patient.
■ Select [Print] to print the trend data of selected patient.
■ Select [Send] to transmit the selected patient’s trend data to the EMR through an
eGateway or HL7.
• The trend data can only be sent out when the monitor is connected to
Electronic Medical Record system (EMR).
In the spot check tabular trends:
To Next Page
Loading...
