7. Lift the inner storage box upwards, and remove it from the main shipping
container.
8. Grasping the sides, slide the cardboard main shipping box upwards, exposing
the ZS3 system. Continue lifting until the cardboard box can be completely
removed, and set aside.
Figure 5.4-ZS3
9. Remove the protective foam in the back of the display, and pull forward the upper
foam of the display
Figure 5.5-ZS3
10. Use Velcro to stick the wooden ramp and the front support board, and put one
side of the wooden ramp downward to the ground.
To Next Page
Loading...
Need help?
General
