Minebea Intec PR 5220 Series - Page 131

7.15.1.3 SMA protocol
The following window opens:
4. Select [Baudrate] and conrm.
A selection window opens.
5. Select the desired transmission speed and conrm.
6. Select [Parity] and conrm.
A selection window opens.
7. Select the desired parity and conrm.
8. Select [Slave ID] and conrm.
9. Enter and conrm the slave address (in this case: 65).
10. Press 2× to exit the menu and save.
1. Select [SMA] and conrm.
A selection window opens.
2. Select the desired interface and conrm.
The selected interface is displayed.
Transmitter Series PR 5220 7 Commissioning
Minebea Intec EN-128