Minebea Intec PR 5220 Series - Page 132

7.15.1.4 xBPI protocol
3. Press the [Param] softkey to set the parameters.
The following window opens:
4. Select [Baudrate] and conrm.
A selection window opens.
5. Select the desired transmission speed and conrm.
6. Press two times to exit the menu and save.
1. Select [xBPI-Port] and conrm.
A selection window opens.
2. Select the desired interface and conrm.
7 Commissioning Transmitter Series PR 5220
EN-129 Minebea Intec