Minebea Intec PR 5220 Series User Manual

Note:
The ash procedure will not start if the reset key is not pressed within the 30-second
time period.
Note:
If the device cannot start because the software has not loaded correctly, the rst
three LEDs blink in a pattern to prompt an update.
As soon as software loading is completed the device will be re-started.
During the ash procedure, LEDs 14 blink in a pattern.
5. Load next le, as described.
9 Extended functions Transmitter Series PR 5220
EN-185 Minebea Intec

Minebea Intec PR 5220 Series Specifications

General

Brand	Minebea Intec
Model	PR 5220 Series
Category	Transmitter
Language	English