Minebea Intec PR 5220 Series - Page 34

4.4.3.2 Connecting an IS platform
One IS platform with xBPI or SBI protocol can be connected via the RS-485 interface
(2-wire).
PR 5220/00 switch settings PR 5220/00 conguration
ON: S1, S2, S3
S4 not relevant
- [Serial ports parameter]- [xBPI-Port]- [Builtin RS-485]
Note:
For more information, see the platform scale manual.
4 Device installation Transmitter Series PR 5220
EN-31 Minebea Intec