Configuring the Network
Logging Onto the Web Configuration Interface
24 | Smart 108/116 IP
Figure 11 – Boot-Up Process
Assigning Static IP Addresses for a Number of Units
You can connect more than one Smart 108/116 IP to the same network. If there is no
DHCP server, or you want to use static IP addresses, connect the Smart 108/116 IP
units one at a time and change the static IP address of each unit before connecting
the next unit.
3.2 Logging Onto the Web Configuration
Interface
You can complete the initial setup of the Smart 108/116 IP system via the Web
configuration interface.
To Next Page
Loading...
General