Configuring the Network
Configuring the KVM Switch
32 | Smart 108/116 IP
2. Change the Permission
3.
To change the password, c
The Password
parameter opens. In the upper textbox, type the new password; in
the lower textbox, confirm the new password.
You cannot change the password of an
to the system.
4. Click OK.
The
User page opens with the user information changed accordingly
3.6
Configuring the KVM Switch
When a KVM switch is connected to the
following switch parameters
The names of the servers connected to the KVM switch
give the servers connected to Smart 108/116 IP unique names, so that users
accessing the system can easily identify the servers.
To
1.
From the configuration menu, select
The KVM Switch Configuration
Figure 19 – Edit User Page
Access as required.
To change the password, c
lick .
parameter opens. In the upper textbox, type the new password; in
the lower textbox, confirm the new password.
You cannot change the password of an
Administrator who is
User page opens with the user information changed accordingly
.
Configuring the KVM Switch
When a KVM switch is connected to the
Smart 108/116 IP
The names of the servers connected to the KVM switch
–
give the servers connected to Smart 108/116 IP unique names, so that users
accessing the system can easily identify the servers.
:
From the configuration menu, select
Switch Configuration.
The KVM Switch Configuration
page appears.
parameter opens. In the upper textbox, type the new password; in
give the servers connected to Smart 108/116 IP unique names, so that users
To Next Page
Loading...
General