Conducting a Remote Session
Synchronizing Mouse Pointers
54 | Smart 108/116 IP
Examples
The following are examples of the instructions for two different target operating
systems. After performing the instructions for the selected operating system, you
should click OK to synchronize the mouse pointers.
1. For Windows 7: Go to the Mouse Properties on the Target and clear the Enhance
pointer precision checkbox.
Figure 43 – Windows 7 Mouse Properties
2. For Windows 2000: If Mouse Properties were ever changed for the target – even if
they have been returned to their original state – clear the Default checkbox
.
The USB Option
You can use the USB option if you have USB to PS2 conversion between Smart
108/116 IP and the target server via any of the following:
USB-to-PS/2 adapter
USB KVM dongle, such as RICC/ROC USB and X-RICC USB
Unsupported operating systems
SUN Solaris
Use this option if you are sure of the custom acceleration algorithm you are using, or
have been informed to do so by customer support.
To Next Page
Loading...
General