Minicom Smart 108 IP User Manual

3.8.3 Restoring
Factory Settings
You can restore the
Smart 108/116 IP
original
Smart 108/116 IP
administrators, including: Network settings*, Servers, Switches, Users,
Passwords.

You have the option to preser
procedure.
The OSD preserves the server names and other settings. You can restore the
OSD settings from the OSD (see Section
Once reset, the data cannot be retrieved.
To
restore factory settings
1. In the toolbar, select
The
Restore Factory Settings
Figure
2.
To preserve network settings, select the
3. Click Restore.
Factory settings are restored
3.9
Reloading a Page
You can load the parameters on any configuration page with the settings from the
Smart 108/116 IP
device. This is convenient if you have already changed settings on
the page, and want to restore the device settings.
To reload a page:
1. In the
Configuration page
The parameters are populated with the device settings.
Configuring
Factory Settings
Smart 108/116 IP
unit to its
factory settings. This r
Smart 108/116 IP
parameters, resetting all the information added by the
administrators, including: Network settings*, Servers, Switches, Users,
You have the option to preser
ve Network settings –
as explained in the
The OSD preserves the server names and other settings. You can restore the
OSD settings from the OSD (see Section
0.0.0).
Once reset, the data cannot be retrieved.
restore factory settings
:
.
Restore Factory Settings
page appears.
Figure
25 – Restore Factory Settings Page
To preserve network settings, select the
Preserve network settings
checkbox
Factory settings are restored
.
Reloading a Page
You can load the parameters on any configuration page with the settings from the
device. This is convenient if you have already changed settings on
the page, and want to restore the device settings.
Configuration page
toolbar, click the button.
The parameters are populated with the device settings.
Configuring
the Network
Reloading a Page
User Guide | 37
factory settings. This r
estores the
parameters, resetting all the information added by the
administrators, including: Network settings*, Servers, Switches, Users,
and
as explained in the
following
The OSD preserves the server names and other settings. You can restore the
checkbox
.
You can load the parameters on any configuration page with the settings from the
device. This is convenient if you have already changed settings on

Minicom Smart 108 IP Specifications

General

Brand	Minicom
Model	Smart 108 IP
Category	Switch
Language	English