Operating
the Smart 108/116 IP Switching System Locally
Using the OSD
68 | Smart 108/116 IP
Setting the
In the Time Settings window, you can
SCN – the scan period
LBL –
the display period of the Confirmation label, showing which computer is
currently accessed
T/O –
the timeout period. When password protection is activated
automatically disable the Management keyboard, mouse
preset time of nonuse.
To set the above periods:
1. Navigate
2.
Place the cursor over one of the three digits and type a new
time period
. Type a leading zero where necessary. For example, type
seconds. The numbers
In the LBL column –
hides the label.
In the T/O column –
causes the
In the SCN column –
000
causes the computer screen to be skipped
6.2.7 Configuring the
To configure the users settings:
1.
In the OSD Settings window (see
line is on it, and press
The Users Settings window appears.
the Smart 108/116 IP Switching System Locally
Period
In the Time Settings window, you can
set the following:
the display period of the Confirmation label, showing which computer is
the timeout period. When password protection is activated
,
automatically disable the Management keyboard, mouse
,
and row.
Place the cursor over one of the three digits and type a new
number
. Type a leading zero where necessary. For example, type
and 999 are reserved, as follows:
Typing 999 displays the label continuously; t
999
disables the Timeout function. Typing
to work immediately.
Typing 999
displays the screen for 999 seconds. Typing
causes the computer screen to be skipped
.
To configure the users settings:
In the OSD Settings window (see
Figure 53), navigate to USERS
.
The Users Settings window appears.
57 – Users Settings Window
the display period of the Confirmation label, showing which computer is
for 40
000
disables the Timeout function. Typing
000
displays the screen for 999 seconds. Typing
To Next Page
Loading...
General