Minicom Smart 108 IP User Manual

Configuring the Network
Performing
Additional Configuration Operations
34 | Smart 108/116 IP
Standard Security Policy
At least six characters
Must not include the user name
To
configure the security settings
1.
From the configuration menu, select
The Security page
appears.
2. In the Account Blocking
section:
 In Block after, type
the number of
username or password
forced time lock.
 In Block account
, select
time, or forever f
or a total block
3. Select the High sec
urity password policy
password policy; clear the checkbox for the standard security policy to apply.
4. In Disconnect after
, select the timeout inactivity period after which the use
disconnected from the system. Select
3.8
Performing Additional Configuration Operations
You can perform the following additional operations on
 Install an SSL certificate
.
Additional Configuration Operations
High Security Policy
At least eight characters; must include at least
one digit, one
uppercase letter, and one of the following
“special” characters
$, %, ^, *, (), _, -, +, =, [], ’, :, ;, ?, /, or {}
Must not include the user name
configure the security settings
:
From the configuration menu, select
Security.
appears.
Figure 21 – Security Page
section:
the number of
allowable attempts to log
in with a wrong
username or password
in a time period specified in
attempts within
, select
for period
to block the account for a specified period of
or a total block
.
urity password policy
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
, select the timeout inactivity period after which the use
disconnected from the system. Select
No Timeout to disable timeout.
Performing Additional Configuration Operations
You can perform the following additional operations on
Smart 108/116 IP
:
.
one digit, one
“special” characters
: !, @, #,
in with a wrong
attempts within
, prior to a
to block the account for a specified period of
checkbox to enable the high security
password policy; clear the checkbox for the standard security policy to apply.
, select the timeout inactivity period after which the use
r is
Performing Additional Configuration Operations
:

Minicom Smart 108 IP Specifications

General

Brand	Minicom
Model	Smart 108 IP
Category	Switch
Language	English