Minicom Smart 108 IP User Manual

Configuring the Network
Configuring the Network Settings
28 | Smart 108/116 IP
To configure Device ID
settings
1. In Device Name,
type a name for
2. In TCP Port,
type the number of the port (from 800 to 65535)
3.3.2 Configuring the
Device IP Address
When a DHCP server is active on the same network to which
connected, the DHCP
can provide automatic IP assignment.
recommend using MAC address reservations in the DHCP server to ensure that the IP
address of the
Smart 108/116 IP
Consult
your Network Administrator regarding the use of the
If
you have access to the server
device name will appear on the DHCP server’s interface, making it easy to
locate.
To configure
the device IP address
 Select automatic IP
address
enable a DHCP server that is active on the same network to which
IP
is connected, to provide automatic IP assignment

Select manual IP address assignment
the DHCP, and then
type the
LAN 1
, provided by your Network Administrator
3.3.3
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
servers and network devices,
environment. The Centralized Management systems combine
access with modern IT standards and requirements. They are the most
comprehensive remote server maintenance solutions available in the market today.
To configure
Centralized Management settings
1. Select the
Enable Centralized Management
be remotely managed by a Centralized Management system
When managed by Centralized Management, only Network Configuration is
available from the Smart 108/116 IP configuration page.
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
managed from Centralized Management.
2. Select the
Manager Auto Discovery
system to
automatically detect
network segment.
OR
settings
:
type a name for
Smart 108/116 IP.
type the number of the port (from 800 to 65535)
.
Device IP Address
When a DHCP server is active on the same network to which
Smart 108/116 IP
can provide automatic IP assignment.
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
Smart 108/116 IP
will not be changed.
your Network Administrator regarding the use of the
DHCP.
you have access to the server
, your configured (or default)
Smart 108/116 IP
device name will appear on the DHCP server’s interface, making it easy to
the device IP address
, do one of the following:
address
assignment – Select the Enable DHCP
checkbox to
enable a DHCP server that is active on the same network to which
Smart 108/116
is connected, to provide automatic IP assignment
.
Select manual IP address assignment
– Clear the Enable DHCP
checkbox to disable
type the
IP Address, Subnet Mask, and
Default Gateway
, provided by your Network Administrator
.
Configuring Centralized Management Settings
Minicom’s Centralized Management IP
-based systems ensure secure con
trol of
servers and network devices,
and
power and user administration in the data center
environment. The Centralized Management systems combine
out-of-band
access with modern IT standards and requirements. They are the most
comprehensive remote server maintenance solutions available in the market today.
Centralized Management settings
:
Enable Centralized Management
checkbox to enable
Smart 108/116 IP
be remotely managed by a Centralized Management system
.
When managed by Centralized Management, only Network Configuration is
available from the Smart 108/116 IP configuration page.
All other settings, such
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
managed from Centralized Management.
Manager Auto Discovery
checkbox to cause
the Centralized Managem
automatically detect
Smart 108/116 IP, if they both reside
on the same
Smart 108/116 IP
is
However, best practices
recommend using MAC address reservations in the DHCP server to ensure that the IP
Smart 108/116 IP
device name will appear on the DHCP server’s interface, making it easy to
checkbox to
Smart 108/116
checkbox to disable
Default Gateway
for
trol of
power and user administration in the data center
KVM via IP
comprehensive remote server maintenance solutions available in the market today.
Smart 108/116 IP
to
When managed by Centralized Management, only Network Configuration is
All other settings, such
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
the Centralized Managem
ent
on the same

Minicom Smart 108 IP Specifications

General

Brand	Minicom
Model	Smart 108 IP
Category	Switch
Language	English