Configuring the Network
Logging Onto the Web Configuration Interface
26 | Smart 108/116 IP
Figure 14 – Network Configuration – Device Tab
From the Configuration menu, you can configure the network, SNMP, Users,
Switch Configuration, and Security settings. After making all configuration changes,
you must click the button in the toolbar for the changes to go into effect.
3.2.1 Web Configuration Interface Tabs
The following table summarizes the Web configuration interface tabs.
Tab Description
Device
For configuration of the device settings, IP address, and centralized management
SMNP
For configuration of network SNMP settings
Users
For adding, editing, deleting, and blocking system Users
Switch Configuration
For configuration of the KVM switch settings
Serial Port
Not in use
Security
For configuration of the security settings
To Next Page
Loading...
General