Minicom Smart 108 IP User Manual

Operating the Smar
t 108/116 IP Switching System Locally
Upgrading
the Smart 108/116 IP Firmware
74 | Smart 108/116 IP
6.3.5
Installing the Software
To install the Update software:
1.
Download the software from the Support section of Minicom’s website.
2.
Install the software on the computer’s hard drive
6.3.6 Starting and C
onfiguring the Update
To start and configure
the Update s
1. Select
Start/Programs/Smart IP Switch Update/Smart IP Switch Update
shortcut icon on the Desktop
The Smart
IP Switch Update window
t 108/116 IP Switching System Locally
the Smart 108/116 IP Firmware
Figure 60 – RS232 Cable
Installing the Software
To install the Update software:
Download the software from the Support section of Minicom’s website.
Install the software on the computer’s hard drive
.
onfiguring the Update
Software
the Update s
oftware:
Start/Programs/Smart IP Switch Update/Smart IP Switch Update
or click the
shortcut icon on the Desktop
.
IP Switch Update window
appears.
Download the software from the Support section of Minicom’s website.
or click the

Minicom Smart 108 IP Specifications

General

Brand	Minicom
Model	Smart 108 IP
Category	Switch
Language	English