Multi-Copy
Key
Description Initial Setting
0A3(L)
1B4(L)
2A4(L)
3B5(L)
4A5(L)
5FLS(L)
6A4(C)
∗
Metric Areas
7B5(C)
Multi-Copy
Key
Description Initial Setting
10 11" × 17"(L)
11 11" × 14"(L)
12 8-1/2" × 11"(L)
13 Letter(L)
14 5-1/2" × 8-1/2"(L)
15 Letter (C)
∗
Inch Areas
20 1st Drawer
21 2nd Drawer
22
PF-201 3rd
Drawer
23
PF-201 4th
Drawer
NOTE: Use "22" (PF-201 3rd Drawer) for PF-101 (for Inch Areas).
Details of Choice Setting Options
•
UCH-0 Mixed Original Detection
Determines whether or not to select the Mixed Original Detection Mode as the priority mode,
valid only when the copier is equipped with an AF-3/AFR-7.
•
If "Mixed Original Detection Mode ON" is selected, the copier can make copies from originals
of assorted sizes loaded in a set.
•
If "Mixed Original Detection Mode OFF" is selected, the copier cannot make copies from
originals of assorted sizes loaded in a set.
Multi-Copy
Key
Description Initial Setting
0 Mixed Original Detection Mode ON
1 Mixed Original Detection Mode OFF
∗
•
UCH-4 Lightweight Original
Determines whether or not to select the Lightweight Original Mode as the priority mode, valid
only when the copier is equipped with an AF-3/AFR-7.
Multi-Copy
Key
Description Initial Setting
0 Lightweight Original Mode OFF
∗
1 Lightweight Original Mode ON
•
UCH-10 Paper size/port priority
Specifies the priority paper size or paper port selected when the Auto Size Mode or Manual
Mode is selected. (Invalid when the copier is set into the Auto Paper Mode.)
•
The 1st Drawer is automatically selected if the copier is not loaded with the priority paper
size or port.
S-30
To Next Page
Loading...
