Minolta EP1080 - Page 227

•
UCH-20 Auto clear ON/OFF
Determines whether or not to activate automatically the auto clear (panel reset) function after
the lapse of 60 sec. after a copy cycle has been completed or a Key on the control panel
operated.
Multi-Copy
Key
Description Initial Setting
0 Auto clear is not activated.
1 Auto clear is activated (after 1 min.)
∗
•
UCH-21 Energy Saving Mode ON timing
Specifies whether to enable or disable the Energy Saving Mode and defines the period of time
it takes the copier to enter the Energy Saving Mode after a copy cycle has been completed or
a Key operated.
Multi-Copy
Key
Description
Initial
Setting
0
Energy Saving Mode
disabled
∗
1
Energy Saving Mode
enabled (1 min.)
2
Energy Saving Mode
enabled (2 min.)
3
Energy Saving Mode
enabled (3 min.)
4
Energy Saving Mode
enabled (4 min.)
5
Energy Saving Mode
enabled (5 min.)
Multi-Copy
Key
Description
Initial
Setting
6
Energy Saving Mode
enabled (6 min.)
7
Energy Saving Mode
enabled (7 min.)
8
Energy Saving Mode
enabled (8 min.)
9
Energy Saving Mode
enabled (9 min.)
10
Energy Saving Mode
enabled (10 min.)
•
UCH-23 Auto clear for Plug-In Counter
Determines whether or not to initialize the copier when the Plug-In Counter is pulled out.
Multi-Copy
Key
Description Initial Setting
0 Copier is not initialized.
1
Copier is initialized when the Plug-In
Counter is pulled out.
∗
S-33