Minolta EP1080 - Page 228

•
UCH-24 Sort/Non-Sort switching ON/OFF
Specifies whether to enable or disable the function that automatically switches between the
Sort and Non-Sort Mode depending on the number of originals loaded in the AF-3/AFR-7 or
the number of copies to be made.
The mode is switched as detailed below when this choice is set to ON:
(1) The Sorter or Staple Sorter is switched into the Non-Sort Mode if a copy cycle is initiated
using a single original in the Sort Mode.
(2) The Sorter or Staple Sorter is switched into the Sort Mode if a copy cycle is initiated using
two or more originals in the Non-Sort Mode.
Multi-Copy
Key
Description Initial Setting
0 Sort/Non-Sort switching OFF
1 Sort/Non-Sort switching ON
∗
•
UCH-51 Special paper setting 1
Designates the 1st Drawer of the copier
for special paper.
•
UCH-52 Special paper setting 2
Designates the 2nd Drawer of the copier
for special paper.
•
UCH-53 Special paper setting 3
Designates the 3rd Drawer of PF-201 or
PF-101 for special paper.
•
UCH-54 Special paper setting 4
Designates the 4th Drawer of PF-201 for
special paper.
Multi-Copy
Key
Description
Initial
Setting
0
Special paper setting is
not made (normal
paper).
∗
1
Special paper setting is
made for the Drawer.
If a Drawer is designated for special paper, the copier does not select that
particular Drawer in the Automatic Paper Select (APS) Mode.
NOTE
S-34