9. Commissioning
MiR100 Hook User Guide (en) 10/2020 - v.3.0 ©Copyright 2016-2020: Mobile Industrial Robots A/S. 135
2. Go to Hook > Software versions and select Upload software.
3. Locate and select the downloaded software package. It may take a few minutes for the
package to successfully upload.
4. Once the software is uploaded, go to System > Software versions and select Upload
software.
5. Locate and select the downloaded software package. It may take a few minutes for the
package to successfully upload.
6. Once the software is uploaded, turn the robot off and then on again.
9.17 Creating backups
It can be useful to create a backup if you at a later stage want to be able to revert to the
exact state of the current software, including data such as settings, missions, and reports.
We recommend to create a backup in the following cases:
• Before you update the robot software.
• Before making any large changes to your site.
To Next Page
Loading...
